Fixturlaser GO Pro

NO TIME WASTED WITH Fixturlaser GO Pro

An Adaptive User Interface with the VertiZontal Moves. Fixturlaser has developed an adaptive user interface, i.e. a user interface that actually tells you what to do based on your measurement results. With the VertiZontal Moves feature, we have brought to you one of the most innovative and time saving features in the shaft alignment world.

The adaptive user interface shows how much a misaligned machine requires to be adjusted by adding or removing shims at the machine’s feet. When proceeding with the measurement, you no longer need to remeasure in between the vertical and the horizontal adjustment during the adjustment process. The following horizontal adjustment is promptly carried out with real values displayed.

The time savings from the VertiZontal Moves are huge; such as e.g. much less walking around machines or climbing up and down to make adjustments and re-measure and/or fewer times shimming, hammering, prying, lifting, sweating, etc.

FEATURES

•    4” Color LCD screen
•    Intuitive icon-based interface
•    M4 and S4 sensors – thinnest available!
•    Verti-Zontal alignment screen
•    Line lasers plus 30mm CCD detectors
•    Pre-mounted fixtures for quick set-up
•    Wireless Bluetooth® communication
•    Lifetime Warranty

Pick Your View with the Screen Flip

picture of Screen Flip Fixturlaser

Confusing when the display screen does not show the machine from the same angle as your view of it? No problem, we have a solution for that as well – the Screen Flip. It enables you to see the machine set-up from the actual view that you have of the machine.

Machine Defined Data

Fixturlaser Machine Defined Date icon

If you are short of time, you will find the Machine Defined Data function very useful. By preloading all relevant parameters (distances, target values, and tolerances) for a specific machine, you will have all data for the machine readily available in your Fixturlaser GO Pro alignment tool!

Power Management System – the Resume Function

Fixturlaser Power Management System- Resume Function icon

The Fixturlaser GO Pro has an exceptional power management system with an integrated resume function. It will automatically save all critical data if and when it goes into energy saving mode or if the battery goes flat. It will automatically resume to where you left off, when you turn on the system again – that is our exceptional Resume Function!

Sensor Technology

Fixturlaser Sensor Technology picture

All Fixturlaser laser alignment tools use two sensor units, i.e. two laser beams. With the integrated innovative technologies, 30 mm CCD sensors and line laser, we have virtually eliminated both rough alignment and laser adjustment, even for big angular misalignments. This is a benefit you would not enjoy with the measurement technique that uses only one laser beam. With such a technique, you would have to remeasure after each and every adjustment.

The dual high performance inclinometers in the sensor units have the highest angle accuracy of the units in each measurement position in the market. The Fixturlaser GO Pro will give you the best possible measurement results, which will result in prolonged machine life time. [sic Fixturlaser]

Videos

Fixturlaser GO Pro Horizontal Shaft Alignment
Fixturlaser GO Pro Horizontal Shaft Alignment
Five effects of Misalignment
Five effects of Misalignment
VertiZontal Process
VertiZontal Process